Course Stuck on 50% loading HELP

Moderator: JohnMeyer

jwheatle30
Posts: 16
Joined: Wed Mar 07, 2018 8:04 pm

Course Stuck on 50% loading HELP

Postby jwheatle30 » Mon Apr 02, 2018 11:54 pm

Hi guys,

I have spent numerous hours working on a course and it's stuck on 50% loading. I have 3 flags per hold easy/med/hard. All the tee boxes match. All my splines are filled. I have out of bounds circling the course. I'm at a loss.

Any help is appreciated!

User avatar
sfr
Posts: 887
Joined: Fri Mar 06, 2015 12:56 pm
Location: Alberta Canada

Re: Course Stuck on 50% loading HELP

Postby sfr » Tue Apr 03, 2018 12:09 am

Not sure if this will help, but I have had times when building the same course and updating things that all of a sudden it would do the 50% load thing and hang. Problem was it would not always do it and I was able to narrow down the issue to be on a set of pins (like the easy pins) and then narrowed down to what holes would load (like front 9 worked but back 9 did not). Found the 2 holes that caused issues and even though all pins seemed to check out I had to remove the pins and then re place them and re build again.

Most times it is an obvious issue with pins where there is one off somewhere where it should not be but the above issue came about from tweaking things and all of a sudden had the issue.
GC2 Simulator Player (Mountain time which is EST -2)

jwheatle30
Posts: 16
Joined: Wed Mar 07, 2018 8:04 pm

Re: Course Stuck on 50% loading HELP

Postby jwheatle30 » Tue Apr 03, 2018 9:28 am

Thanks SFR, I'll give that a try.

LarryKuh
Posts: 181
Joined: Tue Jul 19, 2016 9:08 am

Re: Course Stuck on 50% loading HELP

Postby LarryKuh » Tue Apr 03, 2018 10:08 am

Install my Course Forge patch to make locating rogue tees and pins much easier.

Course Forge Patch

jwheatle30
Posts: 16
Joined: Wed Mar 07, 2018 8:04 pm

Re: Course Stuck on 50% loading HELP

Postby jwheatle30 » Tue Apr 03, 2018 10:35 am

Attached is the error codes I am seeing? Is it because I don't have the course finished? (13-18 pins?). I've played before w/out finishing course, maybe it won't allow me this time?

Thanks guys!!
Attachments
1.jpg
1.jpg (101.67 KiB) Viewed 134 times

LarryKuh
Posts: 181
Joined: Tue Jul 19, 2016 9:08 am

Re: Course Stuck on 50% loading HELP

Postby LarryKuh » Tue Apr 03, 2018 11:56 am

Are these the error messages after you installed the patch? Do you have a capital letter in your scene name?

jwheatle30
Posts: 16
Joined: Wed Mar 07, 2018 8:04 pm

Re: Course Stuck on 50% loading HELP

Postby jwheatle30 » Tue Apr 03, 2018 1:14 pm

Larry again for the win!

I had a capital letter in the name. Never would have thought to look at that. Thanks again Larry,


Return to “Course Forge Discussions & Videos”

Who is online

Users browsing this forum: No registered users and 2 guests