Wall Protection

Moderator: Zmax

TheRock21
Posts: 25
Joined: Sun Feb 11, 2018 7:14 pm

Wall Protection

Postby TheRock21 » Thu Mar 21, 2019 11:44 pm

I'm just about finished with my setup and thought I would the wall panels I used.

Here's a link to a picture of my sim room.

https://imgur.com/a/obqZLUM

And here is a link to the exact tiles I bought.

https://www.amazon.com/gp/product/B00LZ ... UTF8&psc=1

You use double sided command tape to stick them to the wall. I have discovered the stock stickers are sufficient for the walls but insufficient for the ceiling, for that you just need to go buy a couple rolls of the command tape and put one line on each side of the board. Seems plenty sufficient thus far.

TheRock21
Posts: 25
Joined: Sun Feb 11, 2018 7:14 pm

Re: Wall Protection

Postby TheRock21 » Thu May 02, 2019 1:48 pm

The ones on the ceiling need the additional strength tape. 1 stripe on each edge then one slashing from one corner to the other. Otherwise they fall down.


Return to “Place to discuss all things related to affordable home golf simulation”

Who is online

Users browsing this forum: No registered users and 1 guest